10 Metre

The International Ten Metre Class is a construction class, meaning that the boats are not identical but are all designed to meet specific measurement formula, in this case International Rule. At their heyday, Metre Classes were the most important group of international yacht racing classes, and they are still actively raced around the world. "Ten" in class name does not, somewhat confusingly, refer to length of the boat, but product of the formula; 10 Metre boats are, on average, 16.5 meters long.

History

The 10 Metre was used as an Olympic Class during the 1912 and 1920 Olympics. The International Rule was set up in 1907 to replace earlier, simpler handicap system which were often local or at best, national, and often also fairly simple, producing extreme boats which were fast but lightly constructed and impractical. The rule changes several times in history. About 20 boats were built.

Rule development

1907 Rule

Used from 1907 to 1920

10.000 metres = L + B + 1 / 3 G + 3 d + 1 / 3 S − F 2 {\displaystyle 10.000{\mbox{ metres}}={\frac {L+B+1/3G+3d+1/3{\sqrt {S}}-F}{2}}}

where

• L {\displaystyle L} = waterline length (LWL)
• B {\displaystyle B} = beam
• G {\displaystyle G} = chain girth
• d {\displaystyle d} = difference between girth and chain
• S {\displaystyle S} = sail area
• F {\displaystyle F} = freeboard

1919 Rule

Used from 1920 to 1933

10.000 metres = L + 0.25 G + 2 d + S − F 2.5 {\displaystyle 10.000{\mbox{ metres}}={\frac {L+0.25G+2d+{\sqrt {S}}-F}{2.5}}}

where

• L {\displaystyle L} = waterline length (LWL)
• G {\displaystyle G} = chain girth
• d {\displaystyle d} = difference between girth and chain
• S {\displaystyle S} = sail area
• F {\displaystyle F} = freeboard

Events

Olympics