Vertical service code

A vertical service code (VSC) is a sequence of digits and the signals star (*) and pound/hash (#) dialed on a telephone keypad or rotary dial to access certain telephone service features. Some vertical service codes require dialing of a telephone number after the code sequence. On a touch tone telephone, the codes are usually initiated with the star key, resulting in the commonly used name star codes. On rotary dial telephones, the star is replaced by dialing 11.

In North American telephony, VSCs were developed by the American Telephone and Telegraph Company (AT&T) as Custom Local Area Signaling Services (CLASS or LASS) codes in the 1960s and 70s. Their use became ubiquitous throughout the 1990s and eventually became a recognized standard. As CLASS was an AT&T trademark, the term vertical service code was adopted by the North American Numbering Plan Administration. The use of vertical is a somewhat dated reference to older switching methods and the fact that these services can only be accessed by a telephone subscriber, going up (vertically) inside the local central office instead of out (horizontally) to another telephone company.

Feature definitions

The following are the vertical service codes generally recommended by the North American Numbering Plan Administrator for use in the NANP territories. Not all of these services are available in all areas, and some are only available on landline telephones or Mobile phones.

Local Area Signalling Services (LASS) and Custom Calling Feature Control Codes:

See also

• Mobile dial code – Short phone numbers offered by some carriers
• Pat Fleet – Prompt voice for most U.S. AT&T implementations of VSC features
• Public switched telephone network – Aggregate of all public telephone networks
• Short code – Short telephone numbers for voice, text and MMS services from mobile phones

External links

This article incorporates public domain material from . General Services Administration. Archived from on January 22, 2022.